Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yoshida, Hajime; Kosaku, Yasuo*; Enoeda, Mikio; Abe, Tetsuya; Akiba, Masato
JAERI-Research 2005-003, 13 Pages, 2005/03
JAERI-Research-2005-003.pdf:3.33MB
Hydrogen permeation fluxes of the reduced activation ferritic steel F82H were quantitatively measured by a newly proposed method, vacuum thermo-balance method, for a precise estimation of tritium leakage in a fusion reactor. We prepared sample capsules made of F82H, which enclosed hydrogen gas. The hydrogen in the capsules permeated through the capsule wall, and subsequently desorbed from the capsule surface during isothermal heating. The vacuum thermo-balance method allows simultaneous measurement of the hydrogen permeation flux by two independent methods, namely, the net weight reduction of the sample capsule and exhaust gas analysis. Thus the simultaneous measurements by two independent methods increase the reliability of the permeability measurement. The ratio of the hydrogen permeation fluxes obtained by the net weight reduction to that measured by the exhaust gas analysis was in the range from 1/4 to 1/1 in this experiment. It has been demonstrated that the vacuum thermo-balance method is effective for the measurement of hydrogen permeation rate of F82H.
Furuya, Kazuyuki
JAERI-Research 2004-013, 165 Pages, 2004/09
JAERI-Research-2004-013.pdf:53.73MB
no abstracts in English
Wakai, Eiichi; Sato, Michitaka*; Sawai, Tomotsugu; Shiba, Kiyoyuki; Jitsukawa, Shiro
Materials Transactions, 45(2), p.407 - 410, 2004/01
Times Cited Count：6 Percentile：32.72(Materials Science, Multidisciplinary)no abstracts in English
Furuya, Kazuyuki; Wakai, Eiichi; Ando, Masami; Sawai, Tomotsugu; Iwabuchi, Akira*; Nakamura, Kazuyuki; Takeuchi, Hiroshi
Fusion Engineering and Design, 69(1-4), p.385 - 389, 2003/09
Times Cited Count：23 Percentile：80.7(Nuclear Science & Technology)In a fusion reactor, a blanket made of a low activation material like F82H is fabricated by solid Hot Isostatic pressing (HIP) joining method. In a previous study, blanket, grain coarsenings were found in a mock-up around HIP-joined region. To verify an effect of the coarsenings on a strength of the HIP-joined region, tensile test and hardness measurement were done. As the results, the tensile strength increased by about 50 MPa, and the elongation decreased by about 4 % in comparison with that of a standard alloy. Though the hardness was almost constant both in the coarsening and a non-coarsening regions, both of these hardness increased by about 5 %. Therefore, it could be judged that change of the tensile property is due to increase of the hardness. On the other hand, tensile and impact tests of a base metal without coarsening resulted in DBTT increase by about 40 K, although the tensile property was nearly equal to that of the joined-region with coarsening. It can be understood that this is the effect of the heat treatments in the fabrication process of the mock-up.
Terada, Yasuaki*; Ochiai, Kentaro; Sato, Satoshi; Wada, Masayuki*; Klix, A.; Yamauchi, Michinori*; Hori, Junichi; Nishitani, Takeo
JAERI-Research 2002-019, 70 Pages, 2002/10
JAERI-Research-2002-019.pdf:8.47MB
D-T neutron irradiation experiments have been carried out with a F82H-containing breeding blanket mock-up of a fusion in order to investigate the activation characteristics of F82H low activation stainless steel. We have measured reaction rates producing 54Mn, 56Mn, 51Cr and 187W in foils of F82H, chromium and tungsten. MCNP calculations were done with evaluated nuclear data from the JENDL-3.2 and the FENDL/E-2.0 files and the results were compared with the measured values. The comparison shows that by using the current data files the reaction rates obtained from the calculations will be overestimated by up to 10-20% for 54Mn, 56Mn and 51Cr, up to 30-40% for 187W, respectively. The calculated values for tungsten are different with the evaluated nuclear data library, which shows that the neutron capture cross sections of tungsten have discrepancy in the resonance region for each nuclear data libraries.
; Mori, Masahiro; Kikuchi, Mitsuru; Ninomiya, Hiromasa; Jitsukawa, Shiro; Ito, Takao; Kuriyama, Masaaki;
16th IEEE/NPSS Symp. on Fusion Engineering (SOFE '95), p.1214 - 1217, 1995/06
no abstracts in English
